Learning Objectives
To understand:
 the concept and relevance of strategic cost management;
 the basis of price management;
 the leveraging of supplier costs of production and delivery;
 the concept of the total cost of ownership over the product life cycle;
 the scope for collaborative strategic cost management (target pricing and cost
sharing) along the supply chain; and
 the relative advantages and disadvantages of different approaches to supplier

To select the appropriate source of supply the buyer must first consider the specification,
quality and quantity of the requirement, the price to be paid per unit of the deliverable
and the delivery schedule. All these elements are interrelated and, in particular, the cost
and quality of the deliverable are likely to depend on the number of potential suppliers
and how they are engaged by the buyer in sourcing the requirement. When two or more
suppliers vigorously compete for the supply, the quality of the deliverable could easily be
assessed by the buyer, and the latter may switch costlessly between the sources of supply,
it is reasonable to expect that the forces of in- and for-the-market competition between
suppliers will ensure that the buyer gets a good deal, i.e., the supplier tasked with the
delivery has a strong incentive to minimize the unit cost of production, keep profit
margin at the minimum and avoid the temptation to chisel at the quality or let the delivery
schedule slip. But, the sourcing strategy cannot simply rely on the efficiency of market
forces when the choice of suppliers is limited, perhaps restricted to one, the quality of the
product cannot be easily determined and is not immediately visible to the buyer, and
there is no direct visibility of the cost of production and the drives of delivery schedule.

Thus, the development of an efficient sourcing strategy must start with an investment in
better understanding of the cost of supply, the development of Should-Cost approaches,
and the analysis of factors that could induce the supplier to take advantage of the
asymmetric knowledge between the parties and market forces that would not be able to
ensure that the forces of active competition and contestability (potential/latent
competition) deliver a reasonably efficient deal for the buyer. Thus, the first part of this
Topic (sections 7.1-7.5) draws on MHGP, ch. 11. Section 7.6 refers to other readings in
the context of source selection strategy and tactics. Students are also asked to re-read
MHGP, ch. 10, which deals with worldwide sourcing of supplies. For another perspective
see L&F chs. 11, 14 and Baily et al (2008), ch. 9: 225-239.
7.1 Strategic Cost Management

Strategic cost management involves the scoping of opportunities for reducing the
cost/price of procured items while securing the desirable quality, timeliness and
dependability of supplies. How this is done varies along the supply chain depending on
the positioning of the firm of interest (focal firm) in the sequence of value-adding
activities, the firm’s market power relative to that of its suppliers and the competitiveness
of various segment of the chain, particularly its final (end product) segment. The focal
firm may be positioned downstream in the supply chain, in which case it is likely to
source intermediate products that are already quite complex (elaborately transformed), or
it may be an upstream producer that buys relatively simple inputs from its suppliers.
Inter-firm supply chain
Upstream direction of flow Downstream
Support Activities (HRM, IT, Technology, Administration)
Inbound and Outbound Transport and Storage
Firm A
End Customer
Firm B Firm C Firm D
Procurement, R&D, Design, Production, Waste Disposal,
Marketing, Sales, Distribution
Figure 7.1 Inter-firm supply chain
ACSC 2006

Figure 7.1 was first shown in Week 1 as Figure 1.2. It is now used as a framework for
the discussion of different approaches to strategic cost management. For example, if the
focal firm in the Figure is Firm D, it may try to influence the cost of sourcing its inputs
from its upstream supplier C. If it has the market power to influence prices charged by C,
it may use it aggressively to demand deep price discounts. Alternatively, D may decide to
collaborate with C to reduce the latter’s cost of production and to share the cost savings
between the two firms. If Firm D has the market power to influence prices, schedules and
product specification upstream in the supply chain, it may also try to ‘lean on’ upstream
producers such as Firm B and force them to lower their prices. Alternatively, D may
initiate cross-company collaboration with C and B, in which case strategic cost
management may become a collaborative effort between the three companies. This is
discussed in more detail in Exhibits 11.1-11.4 in MHGP: 413-415.
The collaborative cost management will be revisited later in this topic. First, consider the
scope for non-collaborative management of supply prices and costs by the focal firm. As
MHGP observe, “Evaluation of a supplier’s actual cost to provide the product or service,
versus the actual purchase price paid, is an ongoing challenge within all industries” (p.
411). Thus, procurement specialists must understand and take advantage of the principles
of price and cost analysis. To facilitate this understanding, the authors distinguish
 price analysis – “the processes of comparing supplier prices against external price
benchmarks, without (our italics) direct knowledge of the supplier’s costs”;
 cost analysis – “the process of analyzing each individual cost element” to
determine the actual production cost; and
 total cost analysis – the analysis of the total cost of the end product by focusing
on all costs incurred by different organisations that add value to the product along
the supply chain (op. cit.: 411-412).

Sections 7.2-7.4 briefly discuss these concepts. First, a health warning: the procurement
department should not apply these analytic approaches indiscriminately. It should be
selective in its use of analytic resources, in particular its scarce management time. The
Pareto Principle suggests that the time and effort devoted to price and cost analysis
should be proportional to the importance of different procurement items. For example,
suppose that all items purchased are stratified into three categories, A, B and C, where
 category A acquisitions comprise items which are most valuable or critical for the
focal company but relatively small in number, that is, they account for a large share
of the total value of the acquisition but a small share of the total number of items.
This category may also include items that are cheap to buy but critical for the success
of in-house production activity. To procure these items effectively, the procurement
department should use tight control and detailed analysis of supply costs and prices,
detailed price forecasting, continuous monitoring of quantities, prices and costs;

 at the other end of the spectrum, category C acquisitions include items that are
standard, widely available, cheap to buy but which account for a large percentage of
the volume (as opposed to the cost) of all acquisitions. These items tend to be
purchased in bulk and there are usually many alternative sources of supply. As they
tend to be supplied competitively, the market ensures that prices tend to be close to
the cost of production and supplier profit margins are small. The purchasing of these
items should best be kept simple and automated. There is not much point in using
detailed pricing and costing analyses as competitive markets ensure that suppliers
provide value for money. However, it may be useful to analyse samples of products to
confirm that sources of supply are competitive and that markets are effective in
delivering value for money. The procurement department should also use simple
demand extrapolation (rather than detailed price forecasting) and maintain reasonable
safety stocks to avoid supply disruptions; and …………………………………………….

Order a unique copy of this paper
(550 words)

Approximate price: $22

Basic features
  • Free title page and bibliography
  • Unlimited revisions
  • Plagiarism-free guarantee
  • Money-back guarantee
  • 24/7 support
On-demand options
  • Writer’s samples
  • Part-by-part delivery
  • Overnight delivery
  • Copies of used sources
  • Expert Proofreading
Paper format
  • 275 words per page
  • 12 pt Arial/Times New Roman
  • Double line spacing
  • Any citation style (APA, MLA, Chicago/Turabian, Harvard)

Our guarantees

We value our customers, and so ensure that our papers are 100 percent original. Our Team of professionals does not miss the mark; they ensure that step by step each paper is written uniquely. We never duplicate or work as we compare papers rest assured. We deliver our work a day before time to ensure that you don’t miss your deadlines. It is not only doing the work but delivering it at the right time. We capture the consequences of late remittances. .

Money-back guarantee

We value customer satisfaction here at and make sure that you get the best value for your Money. It happens that sometimes you can pay twice for your order or may want to cancel it, or you feel that it doesn’t meet your requirements; our money back guarantee will give you the opportunity to get back your money. We will also refund 100% of money paid double. In case your paper does not satisfy your requirements , we request that you notify us via writing within 2 days otherwise on the third day we will assume that you have been satisfied. Do all your correspondences through our email address

Read more

Zero-plagiarism guarantee

At, our professional writers know the consequence plagiarism does for our clients. We have updated software’s such as article checker and copyscape to check for originality of the custom papers before submission of the final paper to the you. Our guarantee to the customer is that we will write 100% original papers for them that are quality, timely and of low cost. We have experienced professional and competent PhD writers who will write quality custom papers for you..

Read more

Free-revision policy

. At, we are proud to provide top-quality Essay writing service to our esteemed customers. We are ready to take up that challenging academic assignment that is giving you sleepless nights and simplify it for you according to your desired requirements. We are willing to revise your paper if it does not meet your requirements. At, we do not compromise with quality; thus, we offer unlimited free revisions until the customer is satisfied with their custom paper. Our unlimited free revision services are provided under the following terms:.. .

Read more

Privacy policy knows that client’s information is an essential tool for our company. It means that whatever the client requests from our service is kept strictly confidential. It means that whoever writes for this company understands the terms and conditions hence you should not be worried because you will never see your work somewhere else...

Read more

Fair-cooperation guarantee

Rest assured that we will always be attentive to your needs and requirements. We belief in the phrase treat your neighbour as you would want them to treat you. We leave nothing to chance and always look forward to a good interaction with each other.. .

Read more

Calculate the price of your order

550 words
We'll send you the first draft for approval by September 11, 2018 at 10:52 AM
Total price:
The price is based on these factors:
Academic level
Number of pages